HP Deskjet D2530 Printer - Installation problems

background image

Installation problems

If the software installation program stops or fails, check the following topics for more
information:

Installation program stops

"Unknown Device" message displays

Printer name does not appear

If you continue to have problems, visit HP Technical Support at

www.hp.com/support

.

Installation problems

65

Trou

bles

ho

ot

ing

background image

Installation program stops

Cause:

If the installation program stops when it looks for new hardware, one of the

following issues is causing a communication problem:

The USB cable is old or defective.

Software, such as an antivirus program, is running.

Another device, such as a scanner, is connected to the computer.

Solution:

To resolve the problem
1.

Make sure that no USB devices other than the printer, the keyboard, and the
mouse are connected to the computer.

2.

Disconnect and reconnect the USB cable.

3.

Make sure that the printer is connected directly to a USB port on the computer
(instead of through a USB hub).

4.

If the installation program still does not locate the printer, replace the USB cable,
and then continue to the next step.

5.

Click

Cancel

, and then restart the computer.

6.

Turn the printer off, and then disconnect the USB cable and power cord.

7.

Quit any antivirus programs or other software programs that are running on the
computer.

NOTE:

To quit an antivirus program, follow the manufacturer’s instructions.

8.

Reinstall the printer software:

a

. Insert the printer software CD into the drive.

b

. Follow the onscreen instructions. When the installation program prompts you,

connect the USB cable and the power cord to the printer, and then make sure
that the printer is on.

NOTE:

Do not connect the USB cable until you are told to do so.

c

. Follow the onscreen instructions to finish the installation.

9.

Restart the antivirus program.

"Unknown Device" message displays

Cause:

During installation, an “Unknown Device” message might be displayed

when you connect a USB cable between the printer and the computer. A possible
cause might be a defective USB cable.

Solution:

NOTE:

This is not a problem if you are using Windows 2000. If you are using

Windows 2000 and this message is displayed, you can continue with the software
installation.

Chapter 11

66

Troubleshooting

T

roub
les
hoot

ing

background image

To resolve the problem
1.

Disconnect the USB cable from the printer.

2.

Disconnect the power cord from the printer.

3.

Wait approximately 30 seconds.

4.

Reconnect the power cord to the printer.

5.

Reconnect the USB cable to the printer.

6.

If the “Unknown Device” message is still displayed, replace the USB cable.

Printer name does not appear

Solution:

If the printer software seems to install correctly, but the printer name does

not appear in the list of printers when you click

Print

on the

File

menu or in the Printers

folder in Control Panel, try reinstalling the printer software.

To reinstall the printer software
1.

Quit any antivirus programs or other software programs that are running on the
computer.

NOTE:

To quit an antivirus program, follow the manufacturer’s instructions.

2.

Uninstall the printer software:

a

. Insert the printer software CD into the drive, and then follow the onscreen

instructions.

NOTE:

If the installation program does not start automatically, click your

CD drive letter in Windows Explorer, then double-click the setup.exe file.
For example, double-click D:\setup.exe.

b

. When prompted, click

Remove All

.

3.

Reinstall the printer software:

a

. Insert the printer software CD into the drive.

b

. Follow the onscreen instructions to finish the installation.

4.

Restart the antivirus program.

Installation problems

67

Trou

bles

ho

ot

ing